Chevy Colorado Diesel Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
5 Posts
Discussion Starter · #1 · (Edited)
I'm not sure if I'm in the right thread for this post but I didn't see one specifically for A/C compressor issues.

On the 2016 LWN there are two bolts and one stud used to mount the compressor. The two bolts are, I believe, 15mm, hex head bolts. The stud on the underside of the compressor has a 13mm nut that once it's off the end of the stud is shaped similar to a torx or star point, similar to the stud/nut that the a/c line is secured to on the top of the compressor. That stud, according to the manual on acdelcotds.com, should be removed as well. There's not enough room for the compressor to slide off the stud, so it has to come out of there but I can't seem to get it to break loose. I don't know if there's a special tool to fit on the end of it or what....? Any ideas or help would be greatly appreciated!!!
 
1 - 1 of 1 Posts
Top