[cereal killer]

Lift kit? Wheels? Nerf bars? Tune? etc

Post up the FIRST mod you are going to do to your Colorado Diesel. Lets see/hear it!

 

[wicked]

I know it's not much of a mod but the first thing I do when I get a new car is tint the windows. Then I usually upgrade the wheels/tires.

 

[bogey-1]

already have 1.5" BORA spacers, Access Lorado tonneau cover and Westin Pro Trax 4" nerf bars, red LED lights for the interior, LED cargo lights LED reverse lights and hard-wired Magellan dash cam waiting in the garage. the next thing will be the leveling kit, just waiting to see how they sit with the heavier front end and stiffer springs to see how much higher the nose needs to go, and then fender flares and Rally Armor mud flaps and spray in bed liner.

 

[Maxed out]

A pile of boxes alum hitch,floor liners,bed rail lights, mirror mount radar dect,bed mat,cargo tie downs, bed extender,mud flaps,kayak racks,and subwoofer.

 

[NickJ]

Sounds like you are loaded for bear @bogey-1! I cannot wait to see what it looks like two weeks after you take delivery.

Did you look at the sub that you can get from Chevy @Maxed out? I am wondering how that sounds. I have a 10" JL in my ride right now, but it would eat up all of my underseat storage.

 

[Maxed out]

I got the sub from Chevy. I got it from shopchevyparts.com they have the best prices. I wish this truck would come in. I sold mine back in sept

 

[bogey-1]

Sounds like you are loaded for bear @bogey-1! I cannot wait to see what it looks like two weeks after you take delivery.

Did you look at the sub that you can get from Chevy @Maxed out? I am wondering how that sounds. I have a 10" JL in my ride right now, but it would eat up all of my underseat storage.

unfortunately it will probably be a while, unless GM gets going. truck was ordered on 9/18 and currently do not have a TPW

 

[Maxed out]

My TPW is 1/18 3400

 

[bogey-1]

My TPW is 1/18 3400

mine was 12/21 up until 12/24 then it disappeared

 

[Maxed out]

They are regrouping. Mine did this a week before Christmas.

 

[Ottomaddick]

Tinted fronts, black bowties, floor mats, HD badge on tailgate, N-Fab steps. I am very happy with it mechanically so MAJOR mods will take a while.

 

[Jerry V]

Floor mats. Chevy weather tech style. Tint front windows.Weather tech mud flaps.Go Rhino nerf bars. Replaced rims and tires with trail boss take offs. Carbon fiber bow ties.

 

[odosou]

Floor Mats, Line X spray on bed liner and bak flip tonneau cover.

 

[Rogerwh0]

I should be picking mine up Wedensday. I have 3" Pro Comp lift, Fab Four front bumper and 20" Rigid lights Ready to install!

 

[mirandatech]

Post up the FIRST mod you are going to do to your Colorado Diesel. Lets see/hear it![/QUOTE]

My first Mods are going to be:
1x Undercover Flip hard tonneau covers
2x Undercover Slide Toolbox
1x 4 Corners LED Strobe lighst for construction jobsite

I'll post some picts when it's done. Just bought this beast couple of days ago. So far so good. I'm not new to DPF i have used them in COnstruction equipment so i'm familiar with Regen processes. So that shouldn't be a big problem i hope.

 

[Rogerwh0]

Lift, tires and tint complete, now we wait for fab four to get the bumper here. This truck is loving the bigger tires.

 

[mirandatech]

Post up the FIRST mod you are going to do to your Colorado Diesel. Lets see/hear it!

My first Mods are going to be:
1x Undercover Flip hard tonneau covers
2x Undercover Slide Toolbox
1x 4 Corners LED Strobe lighst for construction jobsite

I'll post some picts when it's done. Just bought this beast couple of days ago. So far so good. I'm not new to DPF i have used them in COnstruction equipment so i'm familiar with Regen processes. So that shouldn't be a big problem i hope.[/QUOTE]

What size tires did you get? Are you still suing the oem rims? Did you lift the truck? If so how much lift did you applly 1" 2 "

 

[Rogerwh0]

I am using the stock 18" wheels. I went with the Pro Comp 2.5 lift/leveling kit. It has the 275/70/18. No rubbing on the body or bumper at all, but it does rub the frame full turn. I am looking for some 1/2' wheel spacers to resolve that.

 

[mirandatech]

I am using the stock 18" wheels. I went with the Pro Comp 2.5 lift/leveling kit. It has the 275/70/18. No rubbing on the body or bumper at all, but it does rub the frame full turn. I am looking for some 1/2' wheel spacers to resolve that.

Sweet! It looks cool. But i think i want a gnarlier look for mine. I would go for something taller. Definetely the 275 width is cool!

 

[Rogerwh0]

That is what I was hoping also. Any taller would be into the fender. I think I could get another 1" under it with some trimming but wasn't able to find anything in a 34"x10" for an 18" wheel. I am hoping the bumper makes it look much more aggressive.