Chevy Colorado Diesel Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
232 Posts
Discussion Starter · #2 · (Edited)
Another note on the install. The weathertech install instructions say you have to remove the factory fastener on the lower outside corner and replace it with one in their kit that is not black and a different style that doesn't use a torx socket. However, if you really put a lot of inward pressure when rotating the factory fastener it will just grab and you can reuse the black factory fastener.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top