I dropped mine. I don't remember the kit I bought but it was basically a couple 1/2" washers and longer bolts. It didn't change it much it honestly.
1 - 10 of 10 Posts
Installed my .5" diff drop. Took about 7 minutes lol.
May not look like a big difference, but it is in my opinion
In the first pic you will see the accordion fins on the CV boot are touching and if you can zoom in you'll see light wear rings on the accordion fins. This is what would cause the boot to fail over time, which causes the grease to sling out and the dirt to get in and kills the CVs
In the second pic you can see the fins are no longer laying against each other which will increase the life of the boot exponentially in my opinion.
![Auto part Suspension part Suspension]()
![Auto part Suspension part Automotive exhaust]()
May not look like a big difference, but it is in my opinion
In the first pic you will see the accordion fins on the CV boot are touching and if you can zoom in you'll see light wear rings on the accordion fins. This is what would cause the boot to fail over time, which causes the grease to sling out and the dirt to get in and kills the CVs
In the second pic you can see the fins are no longer laying against each other which will increase the life of the boot exponentially in my opinion.
I did mine with a 3/4 spacer after a 3" lift i also did the sway bar drop
![Land vehicle Tire Vehicle Car Automotive tire]()
1 - 10 of 10 Posts
